REALPOWER
GENERAL
CONTRACTORS N.V.
TUBE BUNDLE AND HEAT EXCHANGER CLEANING

!!!NO MORE UNSAFE AND UNEFFICIENT WORK!!

We carry Automatic Cleaning Equipment which can be used with both flex and rigid lances. The system equipped with a double chain drive and gives you added flexibility as you could use the optional rigid Lance package as well.

The equipment gives excellent cleaning results due to consistant cleaning speed and by cleaning the tubes twice. An extremely versatile combination that can tackle most cleaning jobs and is capable of cleaning 300 to 350 tubes per hour.

 

                                                   

State of the art 3 lance flexlance machine with special features to remove extremely difficult contamination. Automatic cleaning system placing the operator out of reach of high pressure water means maximum safety. Excellent cleaning results due to consistent speed and 2 way cleaning. Average cleaning speed 250-300 tubes per hour. Light weight pneumatic remote control for easy operation. Designed for horizontal and vertical heat exchangers with most types of contamination.

The systeml was developed to clean all kinds of heat exchangers, which need to be cleaned onsite. The machine operates by means of friction blocks, which push the flex lances into the tubes. As the drive system is very close to the tube sheet, the flex lances cannot bend and therefore, all the water pressure can be used for cleaning the exchangers.  

Some Technical Specifications for you to know what is going to hit your bundles

Minimum air pressure 4,0 bar (60 psi)
Maximum air pressure 6,3 bar (95 psi)
Air consumption 30 - 40 L/S (with standard air motors) (63 - 85 cfm)
Cleaning speed 10 cm/sec - up to 50 cm/sec (4" up to 19,5" per second)
Min - max flex lance size 8 - 20 mm outside diameter (,314 - ,787")
Max. pull/push strength approx. 1.000 N (737 foot pounds)
Water pressure reccom. 1.000 bar (higher pressure possible) (14.500 psi)